I’m testing a SATA to IDE adapter without brand.
These are the specs:
- SATA II 3Gbps Mini adapter board (size 75mx26mm)
- Supports any type of SATA device
- Convert SATA Drive like a standard IDE/Atapi Drive
- 48 bits LBA can Break Capacity-limit to support HDD larger than 137Gb
- Compliant with Serial ATA2.6
- Support IDE Master, Slave an Cable select modes
- Tag Command Queuing
- SATA Hot-Plug
- SATA power save modes
- ATA/Atapi pio mode data transfer
- ATA/ATAPI UDMA data transfer rate of 150,100,66, 44, 33, 25, 16.7 Mb/s
- ATA/ATAPI-7 streaming feature set
- 100% OS-transparent hardware bridge converter to support PC, MAC and Linux, no driver required
I checked the converter with a 100gb disk and an A4000.
HDToolBox detects the disk, but after create partitions I can’t save the changes.
I tried with differents disks with the same results.
For now I can’t use the SATA to IDE converter with the Amiga. ;(
Now it is working: read the story here
